cancel
Showing results for 
Search instead for 
Did you mean: 

AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

JohanHendrikx
Contributor II


I have more than 50 AP 3805i connected at X440G2-24p-10G4 and X440G2-48p-10G4 switches.



One AP connect with 100 mb instead of 1Gb.



Port settting on the switch is auto. Also at the AP.



I noticed that the interface setting on the AP is 10 or 100 Mb and not 1Gb??.



I already cleared the config of the AP but it stays 100 Mb



Other AP’s connect with 1Gb.



Johan Hendrik System Architect Audax
13 REPLIES 13

Doug
Extreme Employee
Reference : https://gtacknowledge.extremenetworks.com/articles/Solution/AP-s-are-listed-in-the-AP-s-with-uplink-...
Doug Hyde
Director, Technical Support / Extreme Networks

JohanHendrikx
Contributor II
cable is replaced and teh connection is 1GB. Thanks all
Johan Hendrik System Architect Audax

JohanHendrikx
Contributor II
I did a reset of the AP. I see the slow link in the dashboard and on the switch. I will check the cabling.
Johan Hendrik System Architect Audax

you'll have to check the cable, a lot of times we see problems with the cable category.
GTM-P2G8KFN