cancel
Showing results for 
Search instead for 
Did you mean: 

AP6522 Log comprehensions

AP6522 Log comprehensions

tech_ori
New Contributor II
Hello,

We have 12 AP6522 and a RFS4000 Wireless Controller. All of them are in version 5.5.1.0-017R. The peripherals connected to the AP are 25 MC90XX.

Since september, we started to check the logs of the AP and I need some help to understand some message or to solve some alerts.

There are the message :

  1. KERN-3-ERR: 0| bridge.c:1598 Warning: Filtering MAC address 00-00-00-00-00-00 on vlan 1 port up1 from FDB.
  2. DOT11-5-WPA_WPA2_FAILED: Client 00-23-68-00-00-00 failed group key handshake on wlan TerminauxMobiles radio ap6522-AP1:R1
  3. DOT11-6-CLIENT_DISASSOCIATED: Client 00-23-68-00-00-00 disassociated from wlan TerminauxMobiles radio ap6522-AP9:R1: client initiated (reason code:3)
  4. DOT11-6-CLIENT_DISASSOCIATED: Client 00-23-68-00-00-00 disassociated from wlan TerminauxMobiles radio ap6522-AP3:R1: dot11i 4way handshake timeout (reason code:15)
  5. DOT11-6-CLIENT_DISASSOCIATED: Client 00-23-68-00-00-00 disassociated from wlan TerminauxMobiles radio ap6522-AP8:R1: dot11i group handshake timeout (reason code:16)
I found in the FAQ a similar message for KERN-3-ERR but it's slighty different.

I understand with the second message that there is a problem between the AP and the peripheral.

In the manual for the Wing Wireless Reason Code, reason code says "station has left ess" but it doesn't help me.

For the reason code 15 & 16, the manual says that the problem come from the AP or the client. But the wireless cover is excellent and this messages concern all peripheral.

Some peripherals are in 2,4GHz and some in 5GHz. The AP are at 10m high. I think the height may be the problem.

Can you help me with this alerts ?

Best regards.


10 REPLIES 10

Ronald_Dvorak
Honored Contributor
The dissass reason codes are per 802.11 standard - here a list of a KB article with the list....

https://gtacknowledge.extremenetworks.com/articles/Q_A/What-s-mean-of-802-11-Deauth-Reason-Codes

I'll try that and reply if I need help. Thanks for your help.

Timo1
New Contributor II
For me it sound like a client problem or a wifi design problem.

Capturing is running like this:
remote-debug live-pktcap rf-domain write tftp:///filename.pcap radio all count 1000 filter ether host

This write 1000 packages to your TFTP Server for the client include all wireless packages with the client mac.

With this pcap you can check what happens.

Yes, the channel plan and CCI are good.
For the SNR too. There a pertubation an AP and the controller. For the rest of the AP, there is no noise.
The intervention was carry out by a Wireless specialist.
GTM-P2G8KFN