AP7161 notice "object device does not exist" when i view Rf Domain

  • 0
  • 1
  • Question
  • Updated 12 months ago
  • Answered
Hi everybody

Today I login an Ap7161 (not VC) and receive notice object device does not exist when I view RF Domain.



My virtual controller still normal works



Kindly help me
Thank you
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 4,272 Points 4k badge 2x thumb
Can you see if you get the same result if you log in to the AP via cli and run of command " show rf-domain-manager ". 
Photo of Aviv Kedem

Aviv Kedem

  • 1,554 Points 1k badge 2x thumb
As far as I know, in earlier versions on WING (pre 5.8.4) there were some problems with gui after adoption. It was displays some error messages.
What is the WING ver?
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Thanks you

I'm using Wing 5.8.5, It is true that before using Wing 5.7  I did not encounter this error message. 

Does this bug have any effect?
Photo of Aviv Kedem

Aviv Kedem

  • 1,554 Points 1k badge 2x thumb
As far as I know this is only GUI issue, but maybe you expecting adoption issues with VC.
Please check she adoption status from the relevant AP.
Please post the outputs from CLI:
show adoption status
show adoption history
show mint mlcp history
show mint ne details
show mint links details
show logging
show ver                                  (no need sn)
(Edited)
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Dear Aviv Kedem

It's true that I'm having problems adoption with VC.  As you can see time uptime droption about 17h.

Thank you

Photo of Aviv Kedem

Aviv Kedem

  • 1,554 Points 1k badge 2x thumb
Hello Tuan Nguyen
As we see, you have link drops at AP "DF4-164" with mac ends with 03-63-E4.
I advice you check your ethernet to the AP if it's not connected with MCX.

Regards

Aviv Kedem
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Hi Aviv Kedem

AP "DF4-164" are connected by ethernet  network.  I must work to anything to fix this problem.

Thank you so much
Photo of Tuan Nguyen

Tuan Nguyen

  • 678 Points 500 badge 2x thumb
Thanks all

I restart to FW 5.7 and no receive notice again