cancel
Showing results for 
Search instead for 
Did you mean: 

AP's with link problems

AP's with link problems

JohanHendrikx
Contributor II
In our dashboard I noticed that ther where AP's with link problems. However there are no problems. How can I clear this messages ?

8abdbe8ff8904a98b695f1675dfd5468_RackMultipart20170725-68545-1bffnk9-wifi_health_inline.jpg



Johan Hendrik System Architect Audax
5 REPLIES 5

Ronald_Dvorak
Honored Contributor
OK then it's normal if the APs are connected via a 100Mb ports.

I'm not aware of any way to clear that alarm.

JohanHendrikx
Contributor II
Ap's are connected to a 100 Mb port. Autosensing is working

Johan Hendrik System Architect Audax

JohanHendrikx
Contributor II
firmware version is 10.31.03.001. AP's are connected to a 100 Mb port.
Johan Hendrik System Architect Audax

Nathiya_Munuswa
Extreme Employee
Hi Johan,

What is the firmware version on the controller? Please check the below KB article,

https://gtacknowledge.extremenetworks.com/articles/Solution/AP-s-are-listed-in-the-AP-s-with-uplink-...

Regards,
Nathiya M

GTM-P2G8KFN