Assigning static IPs to Access points

  • 0
  • 1
  • Question
  • Updated 8 months ago
  • Answered
Hi,

Can we assign static IP to APs throught its CLI? What is the default username/password for AP? User guide/Maint guide instructs to assign static IP only after AP connects to controller. But we need to assign IP address and controller address manually to AP to make it adopt to controller. Running own DHCP server or specifying options in existing DHCP server are not possible.

Regards
Karthik.
Photo of Karthik

Karthik

  • 450 Points 250 badge 2x thumb

Posted 4 years ago

  • 0
  • 1
Photo of PARTHIBAN CHINNAYA

PARTHIBAN CHINNAYA, Alum

  • 4,382 Points 4k badge 2x thumb
If it WM 3700/3600/3400 username and password for AP is same as controller.
From CLI of controller use 
Connect <APname>
Type username and password.
Once you login you can assign static ip address and you can specify controller ip address to adopt as well.
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,710 Points 20k badge 2x thumb
If you are working with the IdentFi Wireless Access Points:


Default Log in: admin/new2day

cset ipaddr <ip address>
cset ipmask <255.255.255.255>
cset gateway <ip address>
cset authIpAddr 1 <ip of controller>
cset dhcp disable 
capply 
csave 
(Wait until the prompt comes back)
reboot

Example:
cset ipaddr 10.1.1.1
cset ipmask 255.255.0.0
cset gateway 10.1.254.254
cset authipaddr 1 10.1.1.2
cset dhcp disable 
capply 
csave
(Wait until the prompt comes back)
reboot
Photo of Karthik

Karthik

  • 450 Points 250 badge 2x thumb
Hi Doug,

Yes. Its IdentiFi portfolio. Thanks for the help.
Photo of Bhavesh Patel

Bhavesh Patel

  • 70 Points
Can anybody tell me the command for  how to change/add tagging in AP.
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 51,164 Points 50k badge 2x thumb
I think that is the correct command....

# cset vlanVidWassp <VLANID>

Command syntax:
        cset vlanVidWassp value(-1/1-4094/default)
#
Photo of Josh Fleckinstein

Josh Fleckinstein

  • 60 Points
What is the command to view the config?
Photo of James A

James A, Embassador

  • 7,420 Points 5k badge 2x thumb
cget config globalOnly
(Edited)