cancel
Showing results for 
Search instead for 
Did you mean: 

basic routing question

basic routing question

Robin_Minshall1
New Contributor
I have VLAN configured with no routing on my Extreme network core (very basic network). the Vlans are routed on the gateway which is our UTM appliance (handles WAN/ VPN public traffic etc).

I would like to create a new set of VLANs on the core with routing handled by the core. so clients on those VLANS would have the VLAN IP as the gateway (i think??). how do i then get those clients to route external traffic to the UTM (WAN appliance).

Thanks

6 REPLIES 6

PARTHIBAN_CHINN
Contributor
Note:
Create vlans
Add ports
Assign ip address
and then "enable ipf"
one command will enable ip forwarding on all vlans.
enable ipfowarding works for specific vlan.

Paul_Russo
Extreme Employee
Hey Robin

Yes you will need to enable IPforwarding on that VLAN as well

P

Robin_Minshall1
New Contributor
one more question about this. would I need to enable IP forwarding on the VLAN that the Default Gateway is on?

Robin_Minshall1
New Contributor
Thanks for the replys, i will be testing this tomorrow and will let you know if i get it to work.

Thanks

GTM-P2G8KFN