BCM error detected

  • 0
  • 1
  • Question
  • Updated 4 years ago
Create Date: Sep 5 2012 3:15AM

Hi,

on a X450a-24x we are getting BCM error detected on module 0. We tried several XOS versions, up to 15.1.3 and still the message is here and we getting packets dropped by switch. Question: what is BCM? Is there a way to fix this problem and how?

Thanks.

Vaidotas
(from Vaidotas_Cerniauskas)
Photo of EtherNation User

EtherNation User, Official Rep

  • 20,340 Points 20k badge 2x thumb

Posted 4 years ago

  • 0
  • 1
Photo of EtherNation User

EtherNation User, Official Rep

  • 20,340 Points 20k badge 2x thumb
Create Date: Sep 5 2012 4:59AM

Hello ViadotasThe best thing to do is open a case with TAC and let them determine the root cause. That error usually refers to a HW issue where the switch may need to be replaced. Only TAC can verify the problem and issue the replacement.ThanksP

(from Paul_Russo)
Photo of EtherNation User

EtherNation User, Official Rep

  • 20,340 Points 20k badge 2x thumb
Create Date: Sep 7 2012 11:55PM

hi Vaidotas 


i would hazard a guess at bcm being one of the broadcom chip/ICs used inside the switch. so as prusso says contact tac. 

(from conrad_jones)

This conversation is no longer open for comments or replies.