Blank IP address after configuring

  • 0
  • 1
  • Problem
  • Updated 11 months ago
  • Not a Problem
After configuring the Enterasys A2H124-24FX from previously downloaded *.cfg file via command "configure configs/FILENAME.cfg" host IP address and mask becomes empty.
In config-file there is a line with command "set ip address 10.25.1.1 mask 255.255.255.0"
Photo of Dmitry

Dmitry

  • 70 Points

Posted 11 months ago

  • 0
  • 1

Be the first to post a reply!