C5 IGMP configuration

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
Dear all,

The  firmware version for C5 now includes the command set igmp enable <VLAN_ID> (before only available for the K/S).

This command replaces the following 2 commands required for the old firmware versions ?

set igmpsnooping interfacemode *.*.* enable
set igmpsnooping adminmode enable

Many thanks for your support
Photo of Luis Oliveira

Luis Oliveira

  • 182 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Mike D

Mike D, Alum

  • 3,852 Points 3k badge 2x thumb
Hello Luis,

The vlan enable mode command replaces the interface mode command.  IGMP will still need to be globally enabled.  

Best regards