C5210 Fans at High Speed after Power Supply Predictive log messages

  • 0
  • 1
  • Article
  • Updated 4 years ago
Article ID: 16079 

Products
WS-C5210, supported with firmware 8.21.01.0198 and higher

Changes
Model WS-C5210 IdentiFi Wireless Controller deployed into the network.

Symptoms
System LED is amber.

Fan speed increases to high - sounding loud or noisy.
Fans run at maximum speed until either the controller is rebooted or the power supply is disabled.

Presence of log messages similar to the following, referencing PS1 or PS2:
06/24/13 21:05:33    Major    IPMI Event Daemon    Power Supply sensor PS2 Status - Predictive failure Asserted

Cause
The internal BIOS settings issue incorrect hardware commands when a perceived environmental change - such as a detected, possibly transient, power failure - is introduced.

Solution/Workaround
Please contact the GTAC for assistance.

Workaround:
Reboot the controller whenever this condition occurs - after hours, days, or weeks of runtime.
Photo of FAQ User

FAQ User, Official Rep

  • 13,610 Points 10k badge 2x thumb

Posted 4 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.