C5-Series f/w 6.42.10.0016 mis-identifies some MGBIC-LC01/09

  • 0
  • 1
  • Article
  • Updated 5 years ago
  • (Edited)
Article ID: 14499 

Products
C5-Series, firmware 6.42.08.0007 through 6.61.03.0004 

Changes
Installed a MGBIC-LC01 and a MGBIC-LC09 uplink module.
Issued a 'show port status' command. 

Symptoms
The MGBIC-LC01 may be displayed as being "Combo RJ45/1000-lx", when it should be "...1000-sx" (9852).
The MGBIC-LC09 may be displayed as being "Combo RJ45/Invalid", when it should be "...1000-lx" (9852). 

This is a display issue only, applicable to the MGBIC-LC01 and MGBIC-LC09 from specific manufacturers. 

Solution/Workaround
Upgrade to firmware 6.61.05.0009 or higher (14480).
Release notes state, in the 'Changes and Enhancements in 6.61.05.0009' section:
16483 & 16893   Addressed an issue whereby the CLI displayed incorrect port descriptions for certain MGBIC-LC01 and MGBIC-LC09 modules.

Pre-upgrade workaround: Ignore the condition, which is harmless. The MGBIC will function correctly.
Photo of FAQ User

FAQ User, Official Rep

  • 13,610 Points 10k badge 2x thumb

Posted 5 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.