cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

cannot adopted AP7522 to RFS4000

cannot adopted AP7522 to RFS4000

Dimas_Rizky
New Contributor
Hello,
I want to ask, i have Wireless controller RFS4000 and 15 existing AP6521 that adopted to RFS4000, recently i buy new AP7522 and try to adopted to RFS4000 but the result is AP7522 not discoverable to RFS4000, so how can i adopted AP7522 to RFS4000
can you guide me to solve the problem?

12 REPLIES 12

RobertZ
Extreme Employee

Ron_Galien
Extreme Employee
Also important to note that AP7522E express model AP's will not adopt to non express controller platforms. Just in case...

Helpful KCS article:

https://extremeportal.force.com/ExtrArticleDetail?n=000015736

Christoph_S
Extreme Employee
Hello Dimas,

To start with, make sure that:

1 - The firmware on the controller supports the AP7522: >show version
Check to see if you have an AP7522 profile: >show running-config include-factory | grep profile
2 - The AP7522 and controller can see each other. >show mint neighbors
3 - You have enough licenses for adoption of additional APs: >show licenses
4 - The AP7522 is not behind a routed switch. In this case you will have to configure additional parameters for layer 3 adoption

Thank you,

Chris

Christoph S.

Here is a helpful detailed KCS article that covers How to Download Entitled Firmware Files for Extreme Networks Products:- https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-get-access-to-Extranet-for-for-firm...
GTM-P2G8KFN