Cannot Backup Configuration on Securestack

  • 0
  • 1
  • Article
  • Updated 5 years ago
  • (Edited)
Article ID: 10025 

Products
SecureStack C3, C2, B3, B2, A2 

Symptoms
Cannot back up the configuration using TFTP. 

Cause
A SecureStack may be in a state whereby it is not possible to backup a configuration using TFTP (5623). This condition will impact CLI-originated backups ('copy configs tftp...') as well as Enterasys' network management software such as Inventory manager and Netsight Atlas Console. 

The failure could be caused by a manufacturing error that left a flash-based file which has consumed all of the flash space. To determine the amount of available flash memory, issue the following command (5894):
      C2(su)->show system utilization storage
    Storage Utilization:
    Type Description Size(Kb) Available (Kb)
    ----------------------------------------------------------
    RAM RAM device 262144 93959
    Flash Images, Config, Other 0 0
    C2(su)->

    The last line in the display indicates there is no flash available. Since the configuration is written to flash before it is sent to the TFTP server, it cannot be backed up. 

    Solution/Workaround
    Please contact Enterasys Networks Technical Services for assistance.
    Photo of FAQ User

    FAQ User, Official Rep

    • 13,610 Points 10k badge 2x thumb

    Posted 5 years ago

    • 0
    • 1

    There are no replies.

    This conversation is no longer open for comments or replies.