CardExec (state BOOTING) timed out: BD8806_EXOS

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
We upgraded BD 8806 switch to and one of the G48Tc cards in the switch failed to attain operational state after we gave reboot command to make the new EXOS active.

10/08/2015 01:12:39.99 <Noti:DM.Notice> MSM-A: Slot-2 being Powered ON
10/08/2015 01:12:35.71 <Warn:DM.Warning> MSM-A: Slot-2 FAILED (5) CardExec (state BOOTING) timed out      
10/08/2015 01:12:35.71 <Warn:DM.Warning> MSM-A: Slot-2 Timeout in State BOOTING
10/08/2015 01:12:35.68 <Warn:DM.Warning> MSM-B: Slot-2 FAILED (5) Error on Slot-2

1)    Disabled the slot 2 and then enabled. No recovery.
2)    Physical reseating of the card did not help.
3)    Then shifting the card from slot2 to slot6 also went in vain.

Slot-6 information:
     State:               Failed
     Download %:          100
     Last Error:          CardExec (state BOOTING) timed out
     Restart count:       6 (limit 5)
     Serial number:       800224-00-06 1243G-00444
     Hw Module Type:      G48Tc
     Configured Type:     G48Tc
     Ports available:     48
     Recovery Mode:       Reset
     Debug Data:          Peer=Failed


What is the meaning of this last error and the debug data. Is there anything which can be tried to recover the card or it is confirmed hardware fault?
Photo of Harkanwaljeet Singh

Harkanwaljeet Singh

  • 794 Points 500 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Jeremy

Jeremy, Embassador

  • 9,788 Points 5k badge 2x thumb