cancel
Showing results for 
Search instead for 
Did you mean: 

CEP Command gone ?

CEP Command gone ?

Andreas_Larsen
New Contributor II
I have two x440 that I want to test something around CEP with.

I'm running the latest 15.7 code and I was about to configure the CEP part of the vman

This Is what I get ?

System MAC: 00:04:96:83:83:DASystem
Type: X440-24t

configure vman33 add ports 1 ? Execute the command
private-vlan private-vlan mode
stpd STP domain
tagged tagged
untagged untagged
STP domain name
"s0"

And according to
http://documentation.extremenetworks.com/FLR/EXOS_All/Feature_License_Requirements/r_l2-edge-license...

I have CEP on that platform.

Is the command remove or do I configure it in some other way ?

3 REPLIES 3

Andreas_Larsen
New Contributor II
Wow... never though if it but it is a differance...  Thanks

Stephane_Grosj1
Extreme Employee
The usual trap 🙂

conf vman add port

is different than

conf add port

:)

Bill_Stritzinge
Extreme Employee
Andres,

Should be there... what version of code exactly are you running? Just checked with 15.3 and a beta version and all there...

BillHomeX460.3 # conf vman test add port 5 ? Execute the command
cep VMAN Customer Edge Port (IEEE 802.1ad)
tagged tagged
untagged untagged

Bill
GTM-P2G8KFN