change gateway for 1 host on remote subnet

  • 0
  • 1
  • Question
  • Updated 5 years ago
  • Answered
Create Date: Jul 2 2012 9:52AM

I have 1 main site 1 remote site. All traffic is coming back to x450 core at main site. At the main site I have 2 internet gateways. gateway 1 99% of users use for internet access, GW 2 is a smaller netgate FW. The remote site is connected via t1 leased line. Looking for guidance on how to configure a single pc at remote site to connect to GW2 at main site. I think flow-redirect command might do it , but not sure. Thank you for your time

(from David_Kordyban)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb

Posted 5 years ago

  • 0
  • 1
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb
Create Date: Jul 9 2012 6:59AM

Hey Dkordyban

You should be able to use policy-based routing for this. If you use the source address of the remote PC in the if part of the statement you can then redirect to the next hop FW.

For a detail on how to do it please look in the concepts guide under Layer 3 policy-based redirect.


Let us know if you have any other questions.


P

(from Paul_Russo)

This conversation is no longer open for comments or replies.