Changing bandwidth for AVB

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
Dear Experts,
I have a Summit X440-24t AVB switch. I would like to know if there is a command, which could be used to change the bandwidth allocated to best effort traffic, so that it can be used by AVB.
Is the standard setting 75% for AVB and 25% fro best effort?

Thank you,
Jakub
Photo of Jakub Mielczarek

Jakub Mielczarek

  • 180 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Bin

Bin, Employee

  • 5,372 Points 5k badge 2x thumb
Hello Jakub.
Welcome to the Hub. 

Yes, you are correct. AVB is using MSRP(Multiple Stream Reservation Protocol).This technology ensures audio and video can leverage a predefined amount of the bandwidth for AVB audio. This amount is 75% of the maximum data rate; the other 25% of bandwidth can be used for other data. (Note: These percentage allocations can be adjusted as required across all Extreme Networks AVB-enabled switches.)

If you used Summit x440-24, sorry you cannot configure the bandwidth.

If you had G2 product, such as, x460-G2, you could change the bandwidth by using "configure msrp ports traffic-class delta-bandwidth"
http://documentation.extremenetworks.com/exos_commands_22.2/exos_21_1/exos_commands_all/r_configure-...


Best regards,