cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working

Cisco 9970 IP vidoe phones are connected to X440 48p sumit switches, video not working

Arjumand_Qazi
New Contributor II
Hello, Cisco 9970 IP phones are connected to X440 48p sumit switches, Problem is video cam will not work. but when the same phone is hooked to Cisco switch it will work. what config do we need to make on XOS that will support the video? we have LLDP config on all XOS devices but video still not working.. please assist..
3 REPLIES 3

Arjumand_Qazi
New Contributor II
Hello,

how can I manually set in-line power in X440..
the Cisco IP 99xx series is Class 4 PoE device that may require power up to 25w, can I manually set the power setting on the port itself ?

Arjumand_Qazi
New Contributor II
hello Bastian, thanks for the feedback I am missing on

configure lldp port 1:1 advertise system-description
configure lldp port 1:1 advertise system-capabilities

but the last 2 commands of lldp are are alreadt there, advert system-desc and advert system-capab commands will do any difference?

Bastian_Sprotte
Extreme Employee
hello,
the Phone might require LLDP-MED options to understand that it can request more PoE power from the switch. So please try to enable the PoE MED options per LLDP.

configure lldp port 1:1 advertise system-description
configure lldp port 1:1 advertise system-capabilities
configure lldp ports 1:1 advertise vendor-specific med capabilities
configure lldp ports 1:1 advertise vendor-specific med power-via-mdi

regards
Bastian
-

GTM-P2G8KFN