cli different characters/symbols which is not readable.

  • 0
  • 1
  • Problem
  • Updated 1 year ago
  • Not a Problem
cli different characters/symbols which is not readable.
Kindly help.Thanks
Photo of Resolut1on

Resolut1on

  • 836 Points 500 badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Vellachery, Sumeesh

Vellachery, Sumeesh, Employee

  • 3,288 Points 3k badge 2x thumb
Gerald,

Can you please clarify your question in detail? sharing some snippets or error message which you are getting in the cli

Regards,
Sumeesh
Photo of Resolut1on

Resolut1on

  • 836 Points 500 badge 2x thumb
This is a switch xos, I will give you details and screenshots once I check it again maybe on Monday. I will just keep you posted. thanks for support
Photo of Brad Parker

Brad Parker, Technical Support Engineer

  • 3,592 Points 3k badge 2x thumb
Check to make sure the serial settings are correct in your terminal emulator
Photo of Vellachery, Sumeesh

Vellachery, Sumeesh, Employee

  • 3,288 Points 3k badge 2x thumb
Gerald,

As stated by my colleague (Brad) check for the serial settings.

Hope this KB Article might help you


https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-console-into-Extreme-and-Enterasys-...


Regards,
Sumeesh
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,486 Points 10k badge 2x thumb
Like Brad said, I'd check the serial settings. It sounds like the baud rate may not be correct.