Clients by AP report gone in 10.31

  • 0
  • 5
  • Problem
  • Updated 1 year ago
  • Not a Problem
In Version 10.21 the clients by topology and clients by AP reports were removed and replaced with a searchable client report.  This report has many problems the biggest being that it does not auto refresh.  There has been much discussion on the Hub with many users voicing their dissatisfaction with the loss of 2 very useful reports.  One user did point out that if you click the "Stations by AP" graph on the home screen access to the clients by AP report was available.  This was at least half the battle.  Now we have upgraded to 10.31 and that access to the clients by AP report has been removed.  The user community has asked for the reports to be returned not eliminated.  Please bring back these very useful reports.  Please like this post and add comments to show your support for the return of the "Clients by Topology" and "Clients by AP" reports.
Photo of Chris Taylor

Chris Taylor

  • 796 Points 500 badge 2x thumb
  • Frustrated

Posted 1 year ago

  • 0
  • 5
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 48,880 Points 20k badge 2x thumb
Photo of Johan Hendrikx

Johan Hendrikx

  • 3,712 Points 3k badge 2x thumb
I've upgrade the EWC to 10.31.02.007. Now the option 'Stations by AP'  doesn't work any. more !!
Photo of James A

James A, Embassador

  • 6,962 Points 5k badge 2x thumb
Yes, please bring it back. I'm still on 10.21, but the Clients by AP report is great because you can quickly see the number of clients associated to each AP individually, and it load much quicker than the Active Clients Report. Also my APs have names like B3 which when I search for matches client MAC addresses.
Photo of Chris Taylor

Chris Taylor

  • 796 Points 500 badge 2x thumb
Try using the "AP Performance Report by SSID and Radio" from the AP section of the Reports tab.  It shows clients, refreshes and can be sorted to put the highest number of clients at the top.
Photo of James A

James A, Embassador

  • 6,962 Points 5k badge 2x thumb
Hmm, it's OK, still not as nice as the other one. I think I might copy the PHP files from the controller before I upgrade and install them on the new version.
Photo of Chris Taylor

Chris Taylor

  • 796 Points 500 badge 2x thumb
Are you able to share that process.  I would like to do that as well.
Photo of Johan Hendrikx

Johan Hendrikx

  • 3,712 Points 3k badge 2x thumb
Please share that process,
Photo of Nathiya Munuswamy

Nathiya Munuswamy, Employee

  • 1,706 Points 1k badge 2x thumb
Hi,

The Clients by AP and Clients by VNS reporting will be included in 10.31.03

https://gtacknowledge.extremenetworks.com/articles/Q_A/How-do-I-access-the-Active-Clients-by-Wireles... 



Regards,
Nathiya M
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 48,880 Points 20k badge 2x thumb
Yupp..... looks good, thanks team