Configure a simple ACL-LIST

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
I need configure an ACL-LIST in a sw BD-8810 to permit only some IP address from different VLANs could be connect to a server. i read the EXOS_User_Guide_16_1 but i confuse.
can you help me?

Photo of Daniel Valera

Daniel Valera

  • 734 Points 500 badge 2x thumb
  • confuse

Posted 2 years ago

  • 0
  • 1
Photo of Grosjean, Stephane

Grosjean, Stephane, Employee

  • 11,968 Points 10k badge 2x thumb
Photo of Rahmathullah, Syed Nishath

Rahmathullah, Syed Nishath, Employee

  • 486 Points 250 badge 2x thumb
Hi Daniel,
Below is a quick example for your requirement.
Source address here is the IP address you wish to allow.
You can define destination-address as well if you want to specify as per your requirement.

entry one_allow{
if match any{
then {
entry two_deny {
if match any {
then {

EXOS implicitly allows the traffic, hence the second entry has been written to deny here.
Please make a note all other traffic will be denied with above ACL.
To make sure all other traffic work, please allow the subnet and define entries as required.

Below link is handy for starters in ACL:

Thanks & Regards,
Syed Nishath