cancel
Showing results for 
Search instead for 
Did you mean: 

Configure cli Identifi C35

Configure cli Identifi C35

agd
New Contributor
Hi,

I made config changes within the cli (SSH) on a Identifi C35 but looks like it doesn't takes.
Is there any command to "approve"/save the commands ?

Thanks.
BT

5 REPLIES 5

Doug
Extreme Employee
No problem, glad to help.
Doug Hyde
Director, Technical Support / Extreme Networks

agd
New Contributor
Thanks !

Doug
Extreme Employee
It would depend on the section you are in...

Example:

EWC.extremenetworks.com:topology# ?
Available commands are:
Admin Configure details for topology Admin
Bridged at AP untagged Configure details for topology Bridged at AP untagged
Physical 1 Configure details for topology Physical 1
apply Apply the command setting
create Create topology
delete Delete topology
end Return to the base mode
exit Return to the previous mode
internal-vlanid Set controller internal vlan management
logout Logout
multicast-support Set controller multicast support management
show Display settings
topology-group Configure Controller topology group settings
EWC.extremenetworks.com:topology#
Doug Hyde
Director, Technical Support / Extreme Networks

agd
New Contributor
At the CLI, I have no "apply" command.
GTM-P2G8KFN