cancel
Showing results for 
Search instead for 
Did you mean: 

Configure fiber optic module port on X450

Configure fiber optic module port on X450

Fiffo_Liffo
New Contributor
i have an x450 with 24 eternet port +04 Fiber optical ports.
I added a new Optical F module and i don't know i had to make free the correspondant port on ethernet ?
All ethernet ports are used.
how can i configure the new trunk optical ports ?

7 REPLIES 7

Fiffo_Liffo
New Contributor
thank you for all

Fiffo_Liffo
New Contributor
good
the trunk port for that switch will be 1:24 (actual copper port) or 1:25 ? (because i found that there is 1:25 and 1:26 which are not hardly marked on ports).

i have only "X450" and yes i have an XGM module. Now i have plugged an sfp module.

Drew_C
Valued Contributor III
Is it an X450a or X450e?
Ports 25 and 26 are on the back of that switch, and will only be available if there's an XGM module installed.
You can see the front ports and the green/yellow line up close in this image:
http://assets.extremenetworks.com/sites/default/files/null/Summit_x005F_x450a_24T_0006.jpg
GTM-P2G8KFN