Configure maximum mac-addresses per port

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hello Mates, I would like to know what is the equivalent of this cisco command "switchport port-security maximum 2" Im actually working on X440-48p switches and I need to configure that. Thank you very much :)
Photo of Hermes Medina

Hermes Medina

  • 206 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Alexandr P

Alexandr P, Embassador

  • 12,042 Points 10k badge 2x thumb
Official Response
hello!

configure ports port_list {tagged tag} vlan vlan_name limit-learning <number> action stop-learning
Photo of Prashanth KG

Prashanth KG, Employee

  • 5,300 Points 5k badge 2x thumb
Official Response
Hi Jack,

As Alexandr pointed out, we can also make this information automated so that it can show up in the log as below:

Make the following configuration:

configure log filter DefaultFilter add events FDB.FdbNotice

* Slot-1 Stack.32 # sh log
10/28/2015 05:27:23.98 <Noti:FDB.FdbNotice> Slot-1: MAC Blackholed [limit exceeded]: Port 1:47 tag 1 MAC  0: 0: 0: 0: 1:1D  Vlan Default
10/28/2015 05:27:23.91 <Noti:FDB.FdbNotice> Slot-1: MAC Blackholed [limit exceeded]: Port 1:47 tag 1 MAC  0: 0: 0: 0: 1:1C  Vlan Default
10/28/2015 05:27:23.85 <Noti:FDB.FdbNotice> Slot-1: MAC Blackholed [limit exceeded]: Port 1:47 tag 1 MAC  0: 0: 0: 0: 1:1B  Vlan Default
10/28/2015 05:27:23.78 <Noti:FDB.FdbNotice> Slot-1: MAC Blackholed [limit exceeded]: Port 1:47 tag 1 MAC  0: 0: 0: 0: 1:1A  Vlan Default
10/28/2015 05:27:23.71 <Noti:FDB.FdbNotice> Slot-1: MAC Blackholed [limit exceeded]: Port 1:47 tag 1 MAC  0: 0: 0: 0: 1:19  Vlan Default

Hope this helps!