configure stacking redundancy

  • 0
  • 1
  • Question
  • Updated 3 years ago
Hi, all!

How to see stacking redundancy configuration?
What "show" command can show this?

Thank you!
Photo of Alexandr P

Alexandr P, Embassador

  • 12,042 Points 10k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Gene Fontanilla

Gene Fontanilla

  • 504 Points 500 badge 2x thumb
Hi Alexander,

you can use the "show stacking stack-ports"
Photo of simon bingham

simon bingham

  • 1,196 Points 1k badge 2x thumb
Ring = fully resiliant, daisy chain is not resiliant

Slot-3 Stack.22 # show stacking

Stack Topology is a Ring

Active Topology is a Ring

Node MAC Address    Slot  Stack State  Role     Flags

------------------  ----  -----------  -------  ---

*00:04:96:27:c1:12  3     Active       Master   CA-

 00:04:96:27:b0:13 1     Active       Standby  CA-

 00:04:96:27:bb:14  2     Active       Backup   CA-

Photo of Alexandr P

Alexandr P, Embassador

  • 12,042 Points 10k badge 2x thumb
configure stacking redundancy - can be "none", "minimal" and "maximal".
That's not stacking ports, it's about master-capability of nodes in stack.

1."show stacking stack-ports" - don't show this configuration.
2. stacking redundancy and stacking topology - it's different items.
Photo of Alexandr P

Alexandr P, Embassador

  • 12,042 Points 10k badge 2x thumb
Hi, all!

Question is closed.
sh stacking detail | i "Master capable"

If all nodes Master capable - was configured maximum stacking redundancy
If 2 nodes - minimum
If 1 node - none