cancel
Showing results for 
Search instead for 
Did you mean: 

Configure VRRP Protocol

Configure VRRP Protocol

Daniel_Valera1
New Contributor II
Hello community. How to configure VRRP between a SW BD8810 and WM3700?
4 REPLIES 4

BrandonC
Extreme Employee
Hi Daniel,

You should be able to create the VRRP instance on the WMs with the commands below.
vrrp interface vlan vrrp ip Since this will be the same on both WMs, you should be able to put this config into the WM3700 profile.

-Brandon

I created a GTAC Knowledge article for this as well.

Daniel_Valera1
New Contributor II
Hi Alex.

(1)I have two BD8810 sw interconnected and two wm connected to each SW . I have a captive portal that runs on a WM. (2)I want to configure VRRP for the Captive Portal to run in a virtual ip for redundancy.

attached example

3fd7d481a0be47fea0faba5b263cc1f4_RackMultipart20150701-10594-15k0e6k-example_VRRP_inline.jpg

Alexandr_P
Valued Contributor
Hi!

You mean - BD and WM will be two VRRP instances with 1 VIP?
GTM-P2G8KFN