Configure SNTP on a SecureStack

  • 0
  • 1
  • Article
  • Updated 5 years ago
  • (Edited)
Article ID: 5571 

Products
SecureStack C3
SecureStack C2
SecureStack B3
SecureStack B2
SecureStack A2
C5, B5, A4-Series 

Protocols/Features
SNTP 

Goals
Sample configuration 

Solution
Here is an example "Simple Network Time Protocol" (5855) configuration to set a SecureStack to poll the time server (IP 10.10.10.10) every hour, assume the US Eastern Standard Time zone, and automatically adjust for Daylight Savings Time (year 2007+) during the summer.
  #sntp
set sntp client unicast
set sntp poll-interval 10
set sntp poll-retry 5
set sntp server 10.10.10.10

#summer-time
set summertime enable
set summertime recurring second Sunday March 02:00 first Sunday November 02:00 60

#timezone
set timezone 'est' -5 0
For more about the 'summertime' command set, see 5829.
For more about the poll-interval, see 9843

For more about all of the referenced command sets, please refer to the SecureStack Configuration Guide appropriate to your hardware model and firmware version.
Also see this HowTo Video which demonstrates SNTP configuration on a C5-Series.
Photo of FAQ User

FAQ User, Official Rep

  • 13,610 Points 10k badge 2x thumb

Posted 5 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.