Configuring a Landing page on a IdentiFi V2110 controller as replacement for a WM3600 controller

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
  • (Edited)
Dear All

I’m working on a Identify
installation to replace a old Extreme WM wlan installation.

Al is working fine but I have
problems to configure a landing page, can you help me?

On the OLD Extreme WM3600
controllers ( Motorola based ) is the captive portal configured as showed in
the  screen shots below  







Vlan 480 is
a bridged on AP













Do you have
a example to configure this, or can you help me to configure the captive portal
with the information as show in the screenshots?

Thank you

Rien van
Maurik

Photo of Rien Maurik

Rien Maurik

  • 260 Points 250 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,316 Points 20k badge 2x thumb
Hi Rien,

here a link to a document that I've wrote which explains every step...

https://app.box.com/s/p8q9shj6h8po3sc7bxalgm1xuktpsm70

-Ron
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,192 Points 20k badge 2x thumb
Rien,

Do you need any further assistance setting up the captive portal page? 

Thanks, 

Doug 
Photo of Rien Maurik

Rien Maurik

  • 260 Points 250 badge 2x thumb

Hello Doug

The information Ron has send help me a bit but not complete.

My problem is still how to translete this WM3600 based captive portal to the Identify base captive portal? 

 In the Identify manual or in the example Ron send I don't find  a example to configure a extrenal hosted captive portal liked I did with the WM3600 solution.

Do you have one?


greetings Rien

Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,192 Points 20k badge 2x thumb
Take a look at the following guide to see if it helps get your questions answered for external captive portal support: https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=a0bbbcfd-4a72-4613-8e02-3c6a6...
(requires extranet login) 
Photo of Rien Maurik

Rien Maurik

  • 260 Points 250 badge 2x thumb

Hello Doug

I will study the config file

Thank you so far

gr Rien