Configuring SecureStack CiscoDP for VLAN Advertisement to IP Phones

  • 0
  • 1
  • Article
  • Updated 4 years ago
Article ID: 5831 

Products
SecureStack C3
Firmware 1.00.35 and higher
SecureStack C2
Firmware 5.00.28 and higher
SecureStack B3
Firmware 1.00.29 and higher
SecureStack B2
Firmware 4.00.22 and higher
SecureStack A2
Firmware 2.00.00.0012 and higher 

Related to
CiscoDP
IP Phone 

Goals
Sample configuration 

Solution
CiscoDP may be used to communicate VLAN information to an attached IP Phone, when configured as shown below. 

  set ciscodp state enable
  set ciscodp timer 10
  set ciscodp port status enable vvid <vlan_ID> <port_string

The reduced timer setting is so that the phone will know of its intended VLAN before it attempts DHCP. It will thus specify the proper VLAN in its 802.1Q tags, for all its communication. The untagged data from any phone-attached PC will be unaffected by this configuration, and will use the port's PVID setting for its VLAN assignment. 

For more CiscoDP configuration options, please refer to the Configuration Guide.
Photo of FAQ User

FAQ User, Official Rep

  • 13,610 Points 10k badge 2x thumb

Posted 4 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.