Connecting New C5K125-48 onto the Network

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
We are new to using Enterasys C5K125-48 switches ON OUR Network and we wish to add a new C5K125-48 switch to the Network.


We have added an IP address to the new switch and it can be seen as a neighbor but we cannot ping.

We have also untagged for management on the connection ports but to NO avail.


Kindly provide us a step by step configurations on how to add a new C5K125-48 switch?




Photo of Kombe Kaponda

Kombe Kaponda

  • 280 Points 250 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Nico Willamowski

Nico Willamowski

  • 836 Points 500 badge 2x thumb

Hello. In which VLAN you configure your ip address?

It ́s important that you configure also the host vlan. Then you can reach your Switch.

set ip address x.x.x.x mask x.x.x.x gateway x.x.x.x

set host vlan xxx

Photo of Jeremy

Jeremy, Embassador

  • 9,788 Points 5k badge 2x thumb
T-B5(su)->show spantree adminedge port ge.1.20
Port ge.1.20   has a port Admin Edge of Non-Edge-Port

If it says Edge-Port

set spantree adminedge ge.1.20 false