cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Connecting New C5K125-48 onto the Network

Connecting New C5K125-48 onto the Network

Kombe_Kaponda
New Contributor
We are new to using Enterasys C5K125-48 switches ON OUR Network and we wish to add a new C5K125-48 switch to the Network.

We have added an IP address to the new switch and it can be seen as a neighbor but we cannot ping.

We have also untagged for management on the connection ports but to NO avail.



Kindly provide us a step by step configurations on how to add a new C5K125-48 switch?



Thanks,

Kombe

2 REPLIES 2

Jeremy_Gibbs
Contributor
T-B5(su)->show spantree adminedge port ge.1.20
Port ge.1.20 has a port Admin Edge of Non-Edge-Port
T-B5(su)->

If it says Edge-Port

set spantree adminedge ge.1.20 false

Nico_Willamowsk
New Contributor III
Hello. In which VLAN you configure your ip address?

ItĀ“s important that you configure also the host vlan. Then you can reach your Switch.

set ip address x.x.x.x mask x.x.x.x gateway x.x.x.x

set host vlan xxx

GTM-P2G8KFN