Convert Cisco CLI to Extreme EXOS CLI

  • 0
  • 2
  • Question
  • Updated 7 months ago
  • Answered
Hi all,
May I ask does Extremenetworks provide convert tool to translate cisco CLI to Extreme CLI? Is someone could help me to translate it if no tools could help? Thanks in advance.

access-list 103 permit ip any host 172.30.106.71
access-list 103 permit ip any host 172.30.106.72

class-map highservice
 match access-group 103

policy-map highpolicy
 class highservice
  bandwidth 4000

int f0/0
service-policy output highpolicy
Photo of Tim Smith

Tim Smith

  • 224 Points 100 badge 2x thumb

Posted 7 months ago

  • 0
  • 2
Photo of Naresh

Naresh, Employee

  • 1,336 Points 1k badge 2x thumb
Hi Tim,

please find below article to convert a Cisco IOS Access-list to Extreme Exos ACL,
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Convert-a-Cisco-IOS-Access-List-for...

Regards,
Naresh.C
Photo of Tim Smith

Tim Smith

  • 224 Points 100 badge 2x thumb
Thank you but not only ACL configuration need to be convert but also the whole QOS configuration, could you please me to translate it?
Photo of Steven Lin

Steven Lin, Employee

  • 2,330 Points 2k badge 2x thumb
Just type it manually without test, you can have a try in your lab

create meter xxx
configure meter xxx committed-rate 4 Mbps 

entry host1 {
if {
source-address 172.30.106.71/32;

then {
meter xxx
}}
entry host2 {
if {
source-address 172.30.106.72/32;

then {
meter xxx
}}


configure access-list xxx ports xxx egress 
Photo of Steven Lin

Steven Lin, Employee

  • 2,330 Points 2k badge 2x thumb
BTW, There is a hardware limit for apply meter to egress traffic using ACL on BlackDiamond c-, xl-, and xm-series modules, Summit X480, X460, X670, and X770 series switches, and the E4G400 router.
Photo of Tim Smith

Tim Smith

  • 224 Points 100 badge 2x thumb
Thank you all for help! Let me test it.
Photo of Dorian Perry

Dorian Perry, Employee

  • 2,302 Points 2k badge 2x thumb
Also see this very useful CLI cross-reference guide. It includes EXOS, Cisco IOS, EOS, VOSS, and BOSS:

https://documentation.extremenetworks.com/CLI_X-Ref/1.0/CLI_X-Ref_Guide_1.0.pdf

 
(Edited)