Create a Dynamic Group of port based on Access Vlan on Netsight

  • 0
  • 2
  • Question
  • Updated 2 years ago
  • Answered
I need to catch all the port assigned to a particolar vlan on the entire network.
We need to create a Group of Port based on the port configured as untag on this vlan.
The Switch are all XOS, and the port may change vlan direct from the customer, so it would be great this group are dynamic.

Once grouped I would be able to create a script or flax view to monitor and manage this port.
Is possible?

Best Regards
Roberto
Photo of Roberto F.

Roberto F.

  • 690 Points 500 badge 2x thumb

Posted 3 years ago

  • 0
  • 2
Photo of Hernandez, Joshua

Hernandez, Joshua, Employee

  • 1,564 Points 1k badge 2x thumb
Roberto,

I need to ask a couple of questions for clarification:

1. Are you already aware of the ports you want grouped?
2. If so, are you wanting direction on how to create this group?
3. If no, are you wanting direction on how to poll the switches and dynamically add ports to a specific group based on tag status?

Thanks
Photo of Roberto F.

Roberto F.

  • 690 Points 500 badge 2x thumb
Hi Hernandez,

1. We know the vlan we are intrested to (vlan pippo, vlan pluto) we want to group all the untagged port for these vlan on all the switched.
2. We must create a group for each vlan that contain all the untagged port, and this group must be updated automatically when the customer add or remove port from the vlan.
On these group of ports we must create a flex view to check some information.

Thanks
Roberto
Photo of Hernandez, Joshua

Hernandez, Joshua, Employee

  • 1,564 Points 1k badge 2x thumb
Roberto,

Thank you for the response.  I will research this further and provide an update as soon as possible.
Photo of Roberto F.

Roberto F.

  • 690 Points 500 badge 2x thumb
Hi Joshua

have you found something useful?
Photo of Hernandez, Joshua

Hernandez, Joshua, Employee

  • 1,564 Points 1k badge 2x thumb
Roberto,

After researching this, there is no way to dynamically update a port group.