cancel
Showing results for 
Search instead for 
Did you mean: 

Create Layer 3 Interface

Create Layer 3 Interface

Kevin_Craig
New Contributor
Hello, I am looking to assign an IP address directly to an interface opposed to creating a SVI. Is it possible to create a Layer 3 interface within EXOS? Similar to the "No Switchport" command within Cisco IOS.

Kevin,
3 REPLIES 3

Kevin_Craig
New Contributor
Thanks for the explanation Stephen, makes sense when you put it that way.

Patrick, thanks for the advice, that was my backup plan if creating a Layer 3 interface wasn't an option.

Kevin,

StephenW
Extreme Employee
Kevin,

One thing different is EXOS switches share a single MAC we use for all ports.

Stephen

Patrick_Voss
Extreme Employee
Hello Kevin,

You can add an IP address to a VLAN and only add in one port. This essentially gets you what you are looking for.

Here are some articles that should help you get started:

https://gtacknowledge.extremenetworks.com/articles/How_To/Create-VLAN-in-EXOS/?q=create+vlan&l=e...
https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-command-is-used-to-add-ports-to-a-vlan/...
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-inter-VLAN-routing-in-EXOS/?...

Hope this helps!
GTM-P2G8KFN