cancel
Showing results for 
Search instead for 
Did you mean: 

create mirror port on X450a-48t

create mirror port on X450a-48t

Dave_Nordhus
New Contributor
I am trying to mirror a port on a X450a-48t so that I can monitor with Wireshark. I am running "ExtremeXOS version 12.0.3.16". When I try to create the mirror port I get the following message.

* US-WICHITA-APG-SW1.3 # create mirror wireshark to port 17
^
%% Invalid input detected at '^' marker.
* US-WICHITA-APG-SW1.4 #

Is this command supported in the version I am running?+

2 REPLIES 2

Drew_C
Valued Contributor III
Hi Dave,
Were you able to get this working?

Drew_C
Valued Contributor III
Hi Dave,
The
code:
create mirror
command didn't become available until a later EXOS release. You should be able to use the
code:
enable mirroring
command though (described here).

I'd recommend an upgrade if possible, as EXOS 12.0 is quite old. If you are able to get upgraded to 15.3.x (the last supported set of releases for the X450a product line) you can use the instructions in this article:
How To Enable And Configure Mirroring In EXOS
GTM-P2G8KFN