Creating VLAN ACL on BD8806

  • 0
  • 1
  • Problem
  • Updated 2 years ago
  • Solved

trying to create VLAN acl on BD8806 and getting the below error;

SKB-BD8806.38 # configure access-list PEM_LOOP ports 2:48 egress
Error: Policy PEM_LOOP has syntax errors
Line 3 : Attribute cvid is not supported in this platform.


ACL is very simple as below and I tried to apply it ingress and egress on untagged VMAN port.

entry 1 {
if {
cvid 10;
}
then {
count HIT ;
permit;
}
}


version of the EXOS is 15.3.1.4                 
         patch1-44



Please advise

Photo of Alaa Naifa

Alaa Naifa

  • 130 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Stephen Williams

Stephen Williams, Employee

  • 8,838 Points 5k badge 2x thumb
According to the log it looks like CVID is not a supported match condition on this platform.
Photo of Alaa Naifa

Alaa Naifa

  • 130 Points 100 badge 2x thumb
Yes i can see that but why !! Its black dimond 8800 and the image is not old
Photo of Drew C.

Drew C., Community Manager

  • 37,364 Points 20k badge 2x thumb
Can you provide the output of show slot?  It may be that the particular module you're using doesn't support CVID as a match condition.
Photo of Stephen Williams

Stephen Williams, Employee

  • 8,838 Points 5k badge 2x thumb
Alaa,

Any platform that does not support egress ACLs will not support the CVID match criteria on egress.  Lets look at what modules are installed as Drew is asking for.

Reference:
http://documentation.extremenetworks.com/exos/EXOS_21_1/ACL/c_cvid-acl-match-criteria.shtml
Photo of Alaa Naifa

Alaa Naifa

  • 130 Points 100 badge 2x thumb
Slots Type Configured State Ports Flags
-------------------------------------------------------------------------------
Slot-1 10G4Xc 10G4Xc Operational 4 MB
Slot-2 G48Tc G48Tc Operational 48 MB
Slot-3 10G1Xc & nbsp; 10G1Xc Operational 1 MB
Slot-4 G8Xc G8Xc Operational 8 MB
Slot-5 Empty 0
Slot-6 10G8Xc 10 G8Xc Operational 8 MB
MSM-A MSM-48c Operational 0
Photo of Stephen Williams

Stephen Williams, Employee

  • 8,838 Points 5k badge 2x thumb
You have correct HW.  It looks like EXOS 15.4 is where CVID was supported as a match condition.  I would upgrade and the ACL will work.
Photo of André Herkenrath

André Herkenrath, Employee

  • 1,942 Points 1k badge 2x thumb
sorry, but 15.3 is old...