Daisy chain another network device off the LAN2 port of a AP3825i?

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
We have a case where we have an network connected projector very close to out AP's. Can I provide connectivity by daisy chaining it to the LAN2 port of a AP3825i.  Perfect world would be to have it on its own VLAN.
Photo of TJ Carter

TJ Carter

  • 80 Points 75 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,710 Points 20k badge 2x thumb
Not at this time, the system is not setup to work like that. 
Photo of Gareth Mitchell

Gareth Mitchell, Extreme Escalation Support Engineer

  • 5,994 Points 5k badge 2x thumb
Hello

This isn't possible, this article explains how the 2 ports on the AP work: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-default-operational-status-of-the...

 -Gareth

(Edited)
Photo of TJ Carter

TJ Carter

  • 80 Points 75 badge 2x thumb
I appreciate all feedback.  I had seen the document on the "Default Operational..."  The terminology does make one wonder if there are any other operational modes.  Are there?  If so what are they and how are they implemented?
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,710 Points 20k badge 2x thumb
Nothing at this time, we could re-word that article to make sure it's clear.  
Photo of Gareth Mitchell

Gareth Mitchell, Extreme Escalation Support Engineer

  • 5,994 Points 5k badge 2x thumb
Hello

I've modified the article a little to hopefully clear things up, as for your original question, this is not  possible.

-Gareth