cancel
Showing results for 
Search instead for 
Did you mean: 

Daisy chain another network device off the LAN2 port of a AP3825i?

Daisy chain another network device off the LAN2 port of a AP3825i?

TJ_Carter
New Contributor
We have a case where we have an network connected projector very close to out AP's. Can I provide connectivity by daisy chaining it to the LAN2 port of a AP3825i. Perfect world would be to have it on its own VLAN.
5 REPLIES 5

Gareth_Mitchell
Extreme Employee
Hello

I've modified the article a little to hopefully clear things up, as for your original question, this is not possible.

-Gareth

Doug
Extreme Employee
Nothing at this time, we could re-word that article to make sure it's clear.
Doug Hyde
Director, Technical Support / Extreme Networks

TJ_Carter
New Contributor
I appreciate all feedback. I had seen the document on the "Default Operational..." The terminology does make one wonder if there are any other operational modes. Are there? If so what are they and how are they implemented?

Gareth_Mitchell
Extreme Employee
Hello

This isn't possible, this article explains how the 2 ports on the AP work: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-default-operational-status-of-the... -Gareth

GTM-P2G8KFN