default role not working

[Ahmed_Haroun]

in WLAN Service, the default authenticated role does not take effect , any one noticed the same?

[Ahmed_Haroun]

the default role for authenticated is not taking effect .

only when i respond with filter -id the roles will get applied, but if filter-id is not in the response the authenticated and non-authenticated users gets the same role (quarantine) , although this should change to Allow_All role after authentication.

[Ronald_Dvorak]

is that a question ?
you might want to explain in more detail steps what is going on.

i.e. my plan is that if client#A connects to SSID#B with 802,1X setting #C that role#Y is choosen but instead I get role#Z

As Doug mentioned it's working fine - pretty sure that this is a configuration error.

[Ahmed_Haroun]

802.1x , the radius server responds with vlan id , but no filter-id , once authenticated and put in correct vlan users should be allowed all.

[Doug]

Seems to be working fine in my lab. I would need to understand your setup better. I would suggest contacting the GTAC.