Delete SSL certificate

  • 0
  • 1
  • Question
  • Updated 3 weeks ago
  • (Edited)
  • 0
  • 1
Hi,

I am wondering how can i delete an ssl certificate that was generated on a EXOS switch with the command:
"configure ssl certificate privkeylen <length> country <code> organization <org_name> common-name <name>"
Also i wonder if it possible to see the filename and where it is located

Regards
Gonçalo Reis
Photo of GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS

GONÇALO NUNO CONTENTE PIMENTEL DA SILVA REIS

  • 954 Points 500 badge 2x thumb

Posted 4 weeks ago

  • 0
  • 1
4 weeks ago
Photo of Stephen Williams

Stephen Williams, Employee

  • 8,636 Points 5k badge 2x thumb
I don't think you can see the file.  But you can unconfigure the ssl cert in 22.1

 https://documentation.extremenetworks.com/exos_commands_22.1/exos_21_1/exos_commands_all/r_unconfigu...
2018-03-23T15:06:10+00:00
So how can i delete the generated certificate if i dont know where it is, or which one is it?
2018-03-23T15:13:36+00:00
Photo of Stephen Williams

Stephen Williams, Employee

  • 8,636 Points 5k badge 2x thumb
You can see it with "show ssl" and remove it with "unconfigure ssl certificate"
3 weeks ago
Hi Stephen, 

Thank you for your reply, but the unconfigure ssl doesn't work. As i said on my original post, i have configured a ssl certificate to be able to enable the https web server to play around with the RESTCONF, I have done this on EXOS VM. I can see the certificate with "sh ssl", to delete it i run the following commands:
EXOS-VM.17 # unconfigure ssl certificate
%% Incomplete command
EXOS-VM.18 # unconfigure ssl certificate ocsp-signature-ca all
EXOS-VM.18 # unconfigure ssl certificate trusted-ca all
after each command i run the "sh ssl" and can see that the certificate has not been deleted.

Regards
Goncalo Reis
  • 0
  • 1

Powered by Get Satisfaction