DHCP relay issues

  • 0
  • 1
  • Problem
  • Updated 3 years ago
  • Not a Problem
  • (Edited)
i have bootp relay enabled and two vlans, DHCP server on VLAN1.
some clients on VLAN2 are getting IPs assigned for the subnet on VLAN
some  clients on VLAN1 are gettings IPs assigned to subnet on VLAN2. dhcp server is 2008. what am i doing wrong? 
Photo of Robin Minshall

Robin Minshall

  • 70 Points

Posted 3 years ago

  • 0
  • 1
Photo of Jeremy

Jeremy, Embassador

  • 9,788 Points 5k badge 2x thumb
Can you provide the config pertaining to vlan1-2 and bootp?

Thanks
Photo of Stephen Williams

Stephen Williams, Employee

  • 9,034 Points 5k badge 2x thumb
Robin,  Were you able to figure it out?  I would take a packet capture to make sure the switch is sending the traffic with the right network.  Then i would look at the DHCP server configuration.
(Edited)