Does it possible to do a cluster of three or four V2110 (Hyper-V) to increase the number of AP (HA) supported.

  • 0
  • 1
  • Question
  • Updated 2 weeks ago
  • Answered
oes it possible to do a cluster of three or four V2110 (Hyper-V) to increase the number of AP (HA) supported.

Photo of Andre Perazzelli

Andre Perazzelli

  • 80 Points 75 badge 2x thumb

Posted 3 weeks ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,114 Points 50k badge 2x thumb
No, availability is always 1:1.
I don't see a problem with that setup so what is the concern !?


Just to make sure.... you'd have a mobility cluster with more controllers in it.


Photo of Andre Perazzelli

Andre Perazzelli

  • 80 Points 75 badge 2x thumb
No mobility cluster now.
Need to have 250 AP HA + 100 AP (total 350 AP) In the same building.
Does it possible with a mobility cluster ?
If yes, what is the best document to read ?
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,114 Points 50k badge 2x thumb
I don't why you need 3-4 controlllers for it - the V2110 HyperV supports 250local+250foreign APs = 500APs in a 2 controller setup.

Datasheet page#5
https://cloud.kapostcontent.net/pub/38236555-1e21-43a3-9c61-af84c71a5844/wireless-controllers-ds-1.p...
Photo of Pala, Zdenek

Pala, Zdenek, Employee

  • 9,834 Points 5k badge 2x thumb
You can do cluster of 2. However:

If you need mobility then you can have mobility domain of 12 controllers.

If you want sync configurations then you can use management and configure all your controllers from one place.

If you need more throughput then you can use B@AP topology so you do not need to tunnel traffic to the controller.

With the above said there is no need for clustering of more than 2 controllers
Photo of James A

James A, Embassador

  • 7,338 Points 5k badge 2x thumb
Is there an HTML equivalent of the old Java Wireless Manager tool?
Photo of SH

SH

  • 4,816 Points 4k badge 2x thumb
Hello James,

up do now, no!

I opened a case according this point last year and the official answer was until the  function is available in XMCs the old Java "Wireless Manager" is supported.

So far I have not seen any roadmap.

Best regards
Stephan