Does X460-G2 need special config for snmp access?

  • 0
  • 1
  • Problem
  • Updated 4 weeks ago
  • Solved
Hi,

We have a new building with one X460-G2 as core switch/router and many X440-G2 as edge switches. We started configuring and adding them to XMC. But X460-G2 does not come up in XMC. It does not respond to snmpwalk command also. We configure X440-G2's same way:


ARHAVI-NIZAMIYE-X460-G2-24X.1 # show configuration snmp
#
# Module snmpMaster configuration.
#
configure snmpv3 delete community "public"
configure snmpv3 add community "xxxxx" name "xxxxx" user "vlv2c_rw"
ARHAVI-NIZAMIYE-X460-G2-24X.2 #

ARHAVI-NIZAMIYE-X460-G2-24X.3 # show management
CLI idle timeout                 : Enabled (20 minutes)
CLI max number of login attempts : 3
CLI max number of sessions       : 8
CLI paging                       : Enabled (this session only)
CLI space-completion             : Disabled (this session only)
CLI configuration logging        : Disabled
CLI password prompting only      : Disabled
CLI RADIUS cmd authorize tokens  : 2
CLI scripting                    : Disabled (this session only)
CLI scripting error mode         : Ignore-Error (this session only)
CLI persistent mode              : Persistent (this session only)
CLI prompting                    : Enabled (this session only)
CLI screen size                  : 60 Lines 193 Columns (this session only)
CLI refresh                      : Enabled
Telnet access                    : Enabled (tcp port 23 vr all)
                                 : Access Profile : not set
SSH Access                       : ssh module not loaded.
SSH2 idle time                   : none
Web access                       : Enabled (tcp port 80)
                                 : Access Profile : not set
Total Read Only Communities      : 0
Total Read Write Communities     : 1
RMON                             : Disabled
SNMP access                      : Enabled
                                 : Access Profile : not set
SNMP Compatibility Options       :
    GETBULK Reply Too Big Action : Too Big Error
    IP Fragmentation             : Disallow
SNMP Notifications               : Enabled
SNMP Notification Receivers  : None
SNMP stats:     InPkts 1329    OutPkts   0       Errors 0       AuthErrors 2658
                Gets   1055    GetNexts  264     Sets   0       Drops      0
SNMP traps:     Sent   0       AuthTraps Enabled
SNMP inform:    Sent   0       Retries   0       Failed 0


Image version from factory is 16.1.3.6.

What should be wrong? Is there anything we are missing?

Regards

Rahman
Photo of Rahman Duran

Rahman Duran

  • 802 Points 500 badge 2x thumb

Posted 4 weeks ago

  • 0
  • 1
Photo of Necheporenko, Nikolay

Necheporenko, Nikolay, Employee

  • 1,560 Points 1k badge 2x thumb
Hello Rahman,

Please check snmp settings as XMC could not authenticate - "AuthErrors 2658".

Best Regards,
Nikolay 
Photo of Rahman Duran

Rahman Duran

  • 802 Points 500 badge 2x thumb
Hello Nikolay,

You are right, there was a typo hard to see with eyes :) It was "vlv2c_rw" instead of "v1v2c_rw" (letter L instead of numeric 1).

Thank you,

Rahman