cancel
Showing results for 
Search instead for 
Did you mean: 

DynVC

DynVC

Aviv_Kedem
Contributor
Hello guys, How can I manually set up (with CLI) the VC as a primary or secondary ? Thanks
1 REPLY 1

Daniel_Flouret
New Contributor
Aviv,

The Dynamic VC feature allows for automatic failover between several potential VCs. The election is based on the RF Domain Manager process, where the most powerful AP model wins. If the candidates are of the same model (recommended) then the one with the lowest MIND ID wins.

This can be modified by setting the rf-domain-manager priority value in the AP's SELF section.

So, if you have two AP8533 that are VC candidates, giving the one you want as Master a higher priority should do the trick:

ap8533 B8-50-01-17-8C-90
virtual-controller
virtual-controller auto
virtual-controller management-interface ip address 172.16.3.99/24
rf-domain-manager capable
rf-domain-manager priority 100

ap8533 B8-50-01-2C-35-A0
virtual-controller
virtual-controller auto
virtual-controller management-interface ip address 172.16.3.99/24
rf-domain-manager capable
rf-domain-manager priority 10

GTM-P2G8KFN