ELRP traps w/Epicenter

  • 0
  • 1
  • Question
  • Updated 3 years ago
We are using Epicenter 7 (we know EOL for epicenter was awhile ago).
We are managing many deivces.  Now we are trying to setup traps with ELRP w/a XOS device.
Everything was setup, we mimicked a loop, but saw no traps via the alarm manager.  Then on a ref manual for extreme [EPICenter 7.0 Reference Guide Rev. 03 - Extreme Networks], I found this listed under SNMP traps section.....

ELRP VLAN Loop Detected

Extreme Networks proprietary trap. Generated when the ELRP
client detects a loop in the VLAN.

ExtremeWare 7.3
Not supported in
ExtremeXOS

The device tested is with an XOS device. 
Photo of Jimmy

Jimmy

  • 650 Points 500 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Johan Hendrikx

Johan Hendrikx

  • 3,712 Points 3k badge 2x thumb
ELRP is supported in XOS
Photo of Jimmy

Jimmy

  • 650 Points 500 badge 2x thumb
This I know.. Let me rephrase it, can Epicenter recognize SNMP ELRP traps via a xos device?

ty
Photo of Johan Hendrikx

Johan Hendrikx

  • 3,712 Points 3k badge 2x thumb

I don.t know. I work with Netsight. I had to add the snmp trap of ELRP in Netsight. Probably you have to do this also in Epicenter

EVENT extremeElrpVlanLoopDetected .1.3.6.1.4.1.1916.4.6.0.1

Photo of Jimmy

Jimmy

  • 650 Points 500 badge 2x thumb
TY johan.....do you know where abouts in Epicenter this would be added?
Photo of Johan Hendrikx

Johan Hendrikx

  • 3,712 Points 3k badge 2x thumb
Sorry, I don't know what you have to change
(Edited)
Photo of Jimmy

Jimmy

  • 650 Points 500 badge 2x thumb
ty. but u said Probably you have to do this also in Epicenter

EVENT extremeElrpVlanLoopDetected .1.3.6.1.4.1.1916.4.6.0.1


Does this get added somewhere to cause the trap to be triggered if the event occurs?
Photo of Johan Hendrikx

Johan Hendrikx

  • 3,712 Points 3k badge 2x thumb
Yes, It has to be added somewhere so that Epicenter know what to do if  it receive this event.