EMC Tuning 8.03

  • 0
  • 2
  • Problem
  • Updated 11 months ago
  • Solved
As I can have through snmpv3 all the statistics of CPU, memory plus all the data of the statistics of the interfaces that are monitored.

I also need to fine tune all the EMC features for other vendor in this case I require on CISCO.

Thank you for your contribution and collaboration.
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb

Posted 12 months ago

  • 0
  • 2
Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,526 Points 3k badge 2x thumb
Hi Jairo,

Could you explain what you have configured and what is not working on other vendor# ?


Thanks,
Suresh.B
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
Hi Bharathiraja

I have some devices of differents vendor: Cisco Catalys, Cisco Nexus, Extreme, Avaya.

View Cisco Device

View Avaya Device


This is the configuration snmpv2 to Cisco "snmp-server group BCNOC v3 priv
snmp-server user snmpc0rr3v4l BCNOC v3 auth md5 snmpc0rr3v4l priv aes128 snmpc0rr3v4l" 
Photo of Pala, Zdenek

Pala, Zdenek, Employee

  • 9,568 Points 5k badge 2x thumb
Avaya will be supported in 8.0.4 version. very soon!
We can do some cool staff with Vendor Profiles with version 8.0 already. We will be doing magic in version 8.1. stay tuned.
Photo of Pala, Zdenek

Pala, Zdenek, Employee

  • 9,568 Points 5k badge 2x thumb
in the meantime you can use flexviews
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
Thanks for the data, but how can I receive EMC notifications from TRAPS and SYSLOG?
Photo of Pala, Zdenek

Pala, Zdenek, Employee

  • 9,568 Points 5k badge 2x thumb
Hi.

EMC can receive syslog from any source. EMC can receive snmp traps from any source aswell. And SNMP informs also.

Regarding traps and informs if you update MIBs then the OIDs will be translated also.

With 8.0.4 events and alarms from Avaya should be “recognized” and incorporated.

Z.
Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,526 Points 3k badge 2x thumb
Hi Jairo,

Adding to previous comment please check below KB for more details about alarm and syslog.

https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-How-to-Configure-an-Alarm-to-Trig...


Thanks,
Suresh.B