cancel
Showing results for 
Search instead for 
Did you mean: 

Enable ssh2 or telnet on XOS without using the console port

Enable ssh2 or telnet on XOS without using the console port

Carsten_Volmer
New Contributor II
Hello, at all!
I have made a mistake by disabling ssh2 and telnet on an X460G2 (fw 22.4.1.4). And now i can't manage the switch per remote. Is there a possibility by enabling ssh2 or telnet on this switch without driving to the system and using the console port?
Thanks for your interesting!
8 REPLIES 8

Rod_Robertson2
Contributor
How about using the password recovery solution. .XSF file.

Don't know if I am allowed to copy and paste it here , Im sure there will be a GTAC document , just replace create account admin test test with Enable Telnet.

Basically autoexec.xsf should load before the configuration.

Carsten_Volmer
New Contributor II
The web interface isn't working either ..

Necheporenko__N
Extreme Employee
If snmp rw community is configured you may try to do reboot remotely - https://gtacknowledge.extremenetworks.com/articles/How_To/Setting-the-Next-Reboot-time-via-SNMP-with...

Is it possible to just set ssh to enable via SNMP or is there no such MIB object ?
GTM-P2G8KFN