Enforcing Netsight 6.3.184 Console trunk template on EXOS x440-g2 problem

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
Hi

I have a problem to execute port template (trunk port template) which was made with Netsight Console 6.3.184 on x440-g2 port (with EXOS)




What can cause the problem? How to make it work ?

please help
Regards
Marek
Photo of Marek Konopinski

Marek Konopinski

  • 468 Points 250 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Daniel B

Daniel B

  • 360 Points 250 badge 2x thumb

Hi Marek,

I think the VLAN configuration with NetSight work only with EOS not with EXOS till now.

Regards Daniel

Photo of Marek Konopinski

Marek Konopinski

  • 468 Points 250 badge 2x thumb
So your saying that i need to upgrade / move to Exreme Managment 7.0 (nac 7.0)  and it will work ritght?
(Edited)
Photo of Daniel B

Daniel B

  • 360 Points 250 badge 2x thumb

No, in Extreme Management it is the same. You can configure native VLANs via OneView or NetSight Console. But on trunks I mean you have to do it by hand on the shell.


https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-XOS-Vlan-Management

https://community.extremenetworks.com/extreme/topics/vlan-configuration-via-netsight-or-oneview-basi...


Photo of Marek Konopinski

Marek Konopinski

  • 468 Points 250 badge 2x thumb



its kind of like that with extreme in this situation
Photo of Bastian Sprotte

Bastian Sprotte, Employee

  • 1,610 Points 1k badge 2x thumb
Hello Marek,

vlan MIBs has been added in latest 22.1 release.
on the EXOS switch you need to enable the VLAN auto-move function.

configure vlan untagged-ports auto-move on

This feature is real new, and allow to change the untagged VLAN on an port in one call.

regards
BAstian
-
Photo of Marek Konopinski

Marek Konopinski

  • 468 Points 250 badge 2x thumb
i dont want to change untagged vlan in one call, i need to setup trunk port from trunk template from netsight console...
Photo of Bastian Sprotte

Bastian Sprotte, Employee

  • 1,610 Points 1k badge 2x thumb
which Software you running on the x440-g2
regards
Bastian
-
Photo of Marek Konopinski

Marek Konopinski

  • 468 Points 250 badge 2x thumb
i have 21.1.1.X