cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

enterasys A4 Copy firmware From Switch to PC?

enterasys A4 Copy firmware From Switch to PC?

Ali__J
New Contributor
Greetings to you
I'm tired from searching in Google about " how to save current firmware in switch to PC , The main goal from this is take a backup

I Know how to save config file to my pc it's easy by using this command

A4(su)->show config outfile configs/mysave.cfg

A4(su)->copy configs/mysave.cfg tftp://10.10.10.15/Ali_j_albasri.txt

File transfer operation completed successfully.

so the above command using to save config file to my PC using TFPT ,
we know in Cisco you can save IOS Image by using IOS name and TFTP
Like this command

copy flash/c2960-lanbase-mz.122-25.SEE2/c2960-lanbase-mz.122-25.SEE2.bin tftp:server

so i want to do that in Enterasys switches



14 REPLIES 14

Bilal_Bozduman
New Contributor
how is problem

C3(su)->configure configs/Jan11_2006.cfg
Could not open configs/Jan11_2006.cfg for reading.



Jason_Parker
Contributor
This is not supported on the SecureStacks. You will need to call into the GTAC and open a C4(care Request) and management will review and comment if this request can be done.

Here the link to the contact information of the GTAC..
http://www.extremenetworks.com/support/contact/

The GTAC will open a ticket with your CR (change request).
Then product managment will decide whether the new function will be implemented into a new firmware build.

Thanks Jason
you said "call into the GTAC and open a C4(care Request)" , could you tell me where i can do that ?

GTM-P2G8KFN