Enterasys Controller f/w 8.11.03.0024 VNS VLAN Tag configuration lost upon Wizard Completion

  • 0
  • 1
  • Article
  • Updated 5 years ago
Article ID: 14680 

Products
C20, C25, C4110, C5110, V2110; firmware 8.11.01.0161, 8.11.02.0023, 8.11.03.0024
Enterasys (formerly HiPath) Wireless Controller 

Changes
Configuring a Bridged at AP topology with a Tagged VLAN, using the VNS Wizard. 

Symptoms
Upon Wizard completion, its configured Tagged VLAN information is not present. 

Cause
There is a miscommunication between the finish of the Wizard (when all options chosen during the Wizard steps are fully configured on the controller) and the view of the topology's VLAN information. 

Solution/Workaround
Upgrade to firmware 8.11.04.0039 or higher. 

Pre-upgrade workaround: Configure the topology's VLAN information manually, after using the Wizard.
Photo of FAQ User

FAQ User, Official Rep

  • 13,620 Points 10k badge 2x thumb

Posted 5 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.